I have been trying to get this mini transparent oled screen to work for the past hour. Here’s the screens data sheets before anyone asks (https://manuals.plus/ae/1005004180657098). I followed the pinning and here is what I connected. Pin 1 (from screen) goes to pi’s ground, Pin 2 (from screen) goes to pi’s 3.3v, Pin 3 (from screen) goes to pi’s 3.3v, Pin 4 goes to pi’s 3.3v, Pin 5 goes to the pi’s gnd, Pin 6 goes to the pi’s GPIO 25, pin 7 goes to the pi’s GPIO 8, pin 8 goes to the pi’s GPIO 24, pin 9 goes to the pi’s GPIO 11, pin 10 goes to the pi’s GPIO 10, pin 11 is floating right now, i tried to use a 10uf cap instead of a 4.7uf cap (which i do not have) but no luck. I’m pretty sure that pin 11 does not need to be connected anyways so it is floating. Pin 12 goes to the pi’s 3.3v, pin 13 goes to pi’s 3.3v, pin 14 is floating, and pin 15 goes to gnd, screen is black (well transparent) and doesn’t power. Please help. submitted by /u/00Inferno00 [link] [comments]