Asrock H370M-HDV /M.2 - Unable to reach C states higher than C3 Hi guys! Good day! I've been attempting to setup a server using the Asrock H370M-HDV/M.2 motherboard. Specs below: \- Core i3 8100T \- Asrock H370M-HDV/M.2 \- 2x8GB kit of RAM from Team Elite \- Orico 120GB SSD SATA boot drive \- Cooler Master MWE 450 watts bronze PSU For the OS I used Ubuntu Server 24.04 updated. I tried a couple tweaks below: \- I enabled all the settings in BIOS related to the ASPM \- Ran sudo powertop --auto-tune \- Ran AutoASPM script to enable the ASPM * git clone [https://github.com/notthebee/AutoASPM](https://github.com/notthebee/AutoASPM) After performing all of this. I managed to reduce the power consumption to 12.4 watts in idle with no spinning drives at all and the powertop shows only that it goes C3. When I executed the ASPM command it resulted in the photo I added. ASPM L0s L1 Enabled is indicated by the realtek network driver.…